Our LED NEON Flex is produced to the highest standards and boasts and exceptional reliability record. Trusted around to globe by signage and display and industry our Neon Flex in 15 x 26mm is an economical alternative to glass neon in some applications and an excellent linear lighting solution producing a high output ambient glow that can be dimmed using DALI, DMX, MAINS ELV dimming or using one of our simplified radio control dimmers. Its durable outer shell is ideal for the most demanding scenarios and has been used in some of the world’s most demanding night clubs such as DC10 and Space Ibiza. Cuttable every 8cm and run up to 15m without a volt drop.
Please Note: If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.
• 24V Transformer
For a working Neon Flex installation you will need:
• Neon Flex LED
• 1 x Neon Flex Power Cable
• 1 x Neon Flex Connector Pin
• 1 x Neon Flex End Cap
- Voltage - 24v
- Dimensions - 15mm x 26mm
- LED Type - SMD2835 in Epistar Chip
- Number Of LEDs - Varies on Colour (please see specsheets)
- Unit/Cut Length - Varies on Colour (please see specsheets)
- Max Load - 15m
- LED Distance - 8.33mm
- Power - Varies on Colour (please see specsheets)
- Lumens - Varies on Colour (please see specsheets)
- Jacket Type: Domed Top View
- IP Rating - IP44
- Bent Angle - 4cm
Please note that we are not able to offer refunds on custom cut lengths of Neon Flex, only for full 50m reels.