12V Eco Bright LED Tape, RGB Colour Changing, 30 LEDs p/m, IP20 (5m Reel)

SKU: UERGB30E Categories: ,


The Eco Bright RGB Colour Changing LED tape series offers high-quality illumination and features a self-adhesive 3M backing which makes installation quick and hassle free.

This robust tape can be cut to any desired length at any of the allocated cut points and comes with 50mm of 4 core cable on each end ready for hard wiring into your desired controller or driver.

For a plug and play solution please request a bespoke quote.

12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer. To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

  • Supplied in 5 metre reels
  • 2x 500mm 4 core tails on each end
  • LED Type: 5050 High Brightness Chip
  • Power Consumption: 7.2w per metre | 36w per reel
  • Lumens: upto 480 p/m
  • Voltage: 12v
  • Tape Width: 10mm
  • Colour: Red, Green, Blue
  • Number of LEDs: 30 per metre | 150 per reel
  • Water Ingress Rating: IP20 (Non Waterproof)
  • Cut points: every 10cm
  • Dimmable: Yes
  • Guarantee: 3 Year


Additional information



IP Rating

Lumens Per Metre

Tape Width

Watts Per Metre

12V Eco Bright LED Tape, RGB Colour Changing, 30 LEDs p/m, IP20 (5m Reel)