12V Eco Bright LED Tape, Red, 60 LEDs p/m, IP20 (5m Reel)
These 5 metre reels of single colour LED Strip Tape come with a 500mm connector compatible with our range of 12V Syndeo Drivers and self-adhesive backing which makes installation quick and hassle free. There is no complicated wiring involved, simply plug in to the compatible driver and go.
Alternatively, simply cut the Syndeo Connector off the end of the 2-core wire and hard wire into a driver of your choice.
This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. If there is a requirement for the strip tape to be cut into several sections we also offer additional plug & play snap connectors to accompany this.
Maximum runs of up to 5 metres can be achieved with this tape before visible voltage drops occur.
Eco Bright LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.
12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer. To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.
- Sold in 5 metre reels
- 2500mm Syndeo connector cable compatible with the Syndeo multiport driver.
- LED Type: 3528 Low Brightness Chip
- Power Consumption: 4.8w per metre | 24w per reel
- Lumens: 240 p/m
- Colour Wave: 620-625nm
- Voltage: 12v
- Tape Width: 8mm
- Colour: Red
- Number of LEDs: 60 per metre | 300 per reel
- Water Ingress Rating: IP20 (non waterproof)
- Cut points: every 5cm
- Dimmable: Yes
- Guarantee: 3 Year