Circular 360° Display LED Neon Flex, 18mm, 24V, Pink

SKU: TL-NEONCIRC24-PNK Categories: ,


Introducing our new Circular Neon Flex offers full 360° illumination in an 18mm diameter, making it perfect for display lighting

LED Neon Flex is the revolutionary replacement of traditional Glass Neon and is perfect for display lighting

Neon Flex looks better than glass neon – and it opens all the environments where fragile Glass Neon cannot be used. As the name suggests, it is highly flexible. LED Neon Flex can be bent to a minimum radius of 8 cm, and can be cut easily to your desired lengths with the use of 4.17cm cut points. Maximum Length at any time is 9 metres.

Please Note: If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.

For a working Neon Flex installation you will need:

• Neon Flex LED
• 1 x Driver to power your desired length
• 1 x Neon Flex Connector Pin
• 1 x Neon Flex End Cap

IP65 rated subject to correct installation. Heat shrink tube and silicone glue is essential to seal both the endcap and power cable in order to maintain the IP65 waterproof rating.

Drivers and cabling are not covered by the IP65 rating and therefore must be housed indoors in a dry environment. IP65 rating applies to the Neon Flex only.

Please note that we are not able to offer refunds on custom cut lengths of Neon Flex, only for full 50m reels.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

  • Voltage - 24v
  • Dimensions - 18mm Diameter
  • LED Type - SMD2835 in Epistar Chip
  • CRI - >80
  • Unit/Cut Length - 4.17cm
  • Max Running Length - 9m
  • LEDs per metre - 144
  • Power - 7.90W Per Metre
  • Lumens - 159lm Per Metre
  • IP Rating - IP65, subject to correct installation.
  • Bend Radius - 80mm
  • 1 Year Guarantee


Additional information



IP Rating


Circular 360° Display LED Neon Flex, 18mm, 24V, Pink