Handheld 4 Zone Remote Control and Receiver, 12/24V, For RGBW LED Tape
Our RGBW colour remote is ideal for any 12v or 24v RGBW LED tape. To get warm/cool white only just hold the zone buttons (on) for a few seconds and the colours will switch to dimmable white. Easy to install and easy to sync up, these controllers are ideal for home use. Everything works via radio frequency.
Endless receivers can be controlled from one handheld remote. Each receiver is placed between a driver and a run of LED tape. Receivers can be grouped into ‘zones’, of which the remote can run up to four. Zones could easily correspond to rooms in your house, thus you could group all the receivers in your kitchen, bathroom and two bedrooms into four separate zones and control them all via one remote.
The basic product is designed to work as a bundle of one receiver and one remote. You can add more receivers to your basket by adjusting the quantity on the right of the page.
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.
- Maximum output: 10A maximum 12v or 24V
- 9 Colour Programs
- Change speed and brightness levels
- Maximum range is 30m unobstructed
- Up and down Brightness Button
- Size 85(L)X45(W)X23(H) mm Remote 110mm L x 53mm W x 22mm H
- Endless receivers can be used and joined to this Master remote control system.
- Place this product between the Power supply and the LED Strips to control the dimming function.
- This can also be used on Iphone Ipad or Android Devices with add on Wifi Addon
- Uses 2 x AAA Batteries