Mini Display LED Neon Flex , 10x15mm Top View, Blue
LED Neon Flex Mini is a new compact version of our Neon Flex tube lighting, at only 15 x 10mm its small size and light weight it is ideal for slimline single use display applications both indoors and outdoors.
As the name suggests, it is highly flexible and can be bent to a minimum radius of 2 cm, and can be cut easily to your desired lengths. Maximum Length at any time is 10 metres.
Neon Flex can be dimmed via mains dimming, DALI, DMX or RF controllers.
Please Note: If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.
For a working Neon Flex Mini installation you will need:
• Neon Flex Mini LED
• 1 x Neon Flex Mini Power Cable
• 1 x Neon Flex Mini Connector Pin
• 1 x Neon Flex Mini End Cap
• 1 x 24 volt power supply
Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the IP65 Splashproof rating.
All our neon flex comes with a 1 year guarantee as standard on indoor and outdoor installations.
A 24v LED Transformer is required to power our Neon Flex. A full 10 metre run will need a power supply higher than 60w.
Drivers and cabling are not covered by the IP65 rating and therefore must be housed indoors in a dry environment. IP65 rating applies to the Neon Flex only.
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.
- Voltage - 24v
- Dimensions - 15mm x 10mm
- LED Type - SMD2835 in Epistar Chip
- Number Of LEDs - 72 Per Metre
- Unit/Cut Length - 12.5cm
- Max Load - 10m
- LED Distance - 8.33mm
- Power - 5.55W Per Metre
- Lumens - 37 Per Metre
- Jacket Type: Domed
- IP Rating - IP65 subject to correct installation.
- Max Bend Radius - 2cm