Tile-in Aluminium Profile – 2 Metre Length

SKU: 3311-2M Categories: ,

Enquire

Tile-in aluminium profile allows you to create stunning modern lighting, suitable for bathrooms, kitchens, and any tiled area. Due to the unique edge rim you can place standard depth tiles up to 10mm width on top and seal the edges as you would do normally when tiling. Also suitable for outside edges.

The end effect will be a stunning light which is seamlessly integrated with your bathroom/kitchen. Available in silver, we recommend using No Spotting tape to ensure you get the best light output.

Not suitable for floors or areas where the profile will be walked over.

These Aluminium Channels are suitable for housing and protecting our LED strips. They allow a flush install into grooves or furniture pieces as well as prevent the much unwanted secondary refraction from reflective surfaces. They also act as a heat sink for them as well, which in turn will increase the LEDs lifetime as well as slowing down any brightness degradation over time.
Please note: This aluminium channel does not come with a diffuser as standard, this will need to be purchased seperately.
Diffusers will affect the brightness of LED tapes when installed, as a general guide, please see the information below on how much the brightness is affected by each type of diffuser.

Transparent: 5-10% of the brightness will be taken away

Semi-Clear: 25-30% of the brightness will be taken away

Opal: 50-55% of the brightness will be taken away

Black: 65-70% of the brightness will be taken away

This channel can house any LED tape up to and including 10mm in width

  • Dimensions: 13x11mm (excluding tile in trim)
  • Max Tape Width: 10mm
  • Material: Anodized Aluminium
  • Can be recessed into tile
  • Ideal for non waterproof tape
  • End caps available

Additional information

Colour

Guarantee

IP Rating

Maximum Tape Width

External Dimensions

Depth

Length

Tile-in Aluminium Profile - 2 Metre Length

Download